uPVC Window Repairs
Making your home more valuable with uPVC repairs is a good idea. They are also cost-effective and can be fixed quickly when something goes wrong.
Windows that are stained with mists are a sign that the seal on the double glazing has deteriorated and must be replaced. This is a more cost-effective alternative to replacing the entire window.
Cracked glass
If a chip or crack occurs in your window glass, it is not always immediately necessary to replace the entire pane of glass. Window repairs made using Upvc can typically be used to repair the damage. This is due to the fact that uPVC (Un-plasticized Polyvinyl Chloride) windows are designed to last and easy to maintain.
If you've broken a single glass pane, the easiest solution is to apply masking tape or duct tape to cover both sides of the glass. This is a quick and cost-effective method to stop the crack from spreading and it will help to keep out wind, rain bugs, and other debris.
Epoxy resin is a different method to fix a damaged glass. This is a time-consuming solution, but it also gives the best seal and makes your window look like new. Mix the epoxy mixture according to the directions on the package. It is typically a 50/50 blend of resin and hardener. You'll need to be quick because the mixture will get thicker and harden quickly.
After mixing the epoxy with the glass, apply it to the crack in your window glass. With a putty knife apply it to the crack. Once you've sufficiently filled the crack, wipe away any excess resin using a rag moistened with acetone. Allow the epoxy to dry for 24 hours, then take off the rag. Do the same for any other areas.
Replace the broken glass by using tempered glass, which is stronger than normal glass. This form of glass is more safe than normal glass since it shatters into small chunks of granular material instead of sharp, jagged shards. This will also help reduce drafts in your home and lower your energy costs. If you've got severe or extensive cracks in your glass, however, it may be required to replace the entire window instead of repairing the cracks. A professional window fitter may be required for this. They will be able assess the glass and offer suggestions on the most suitable replacement options.
Stiff Window Mechanism
Over time, uPVC window can become stiff and difficult to open or close. This could not only cause a draft but also prevent the window closing properly. A uPVC repair expert can quickly solve this issue, restoring your uPVC windows to their original functionality.
UPVC Windows in the UK are very popular due to their low price as well as their high security and insulation properties. As with any other material, they will deteriorate due to wear and tear over the course of time. In some cases it could be due to an elongating hinge or an issue with the handle or locking mechanism. These issues can be swiftly solved with upvc repairs and are a cheaper alternative to replacing the entire window.
The most common fault with uPVC windows is a seized or jammed operating arm. This is due to the fact that the gearbox inside the window handle may break causing the shoot bolts and roller cams to seize or get stuck in the open position. It's also possible that the lug has been damaged and will not allow the operating arm to move from a closed position to the open position.
It is essential to clean the moving parts of a uPVC window on a regular basis, particularly in winter, when they are exposed to the elements. This will ensure that they don't get rusty, and help to avoid any future issues. Regularly lubricating exposed metal parts is also essential to enhance the lifespan and performance of a uPVC window. A great lubricant is light engineering oil (available in an aerosol can for convenience).
If you are worried that your uPVC window has become stiff, it is advised to speak with an expert. They will have the equipment and know-how to fix it in a secure manner. They can also determine if there is another reason for the issue for instance, damaged gaskets or frames.
It is also recommended not to hit your UPVC window as this can cause damage to the uPVC, leading to a weak seal and increased energy bills. Instead, use a window cleaner to clean any grit or salt from the frame of your uPVC frame where the lugs that move for multipoint locks are located.
Soft Gasket
Upvc windows are tough and require only minimal maintenance but they will sometimes need some TLC to keep running smoothly. The rumbling of draughts coming from your window could be the result of many different factors that include:
You will first need to clean the area surrounding the seal using soap and water. Make sure you clean any areas with cracks or damage. When Repair My Windows And Doors is completely clean, apply some clear sealant to fill the gap and apply it with the help of a caulking gun. Make sure you smooth the sealant to ensure it is even.
Once the sealant is applied, allow it to dry completely before opening your window once again. To make sure that the window is operating properly, you will need to open and close it a few times. If the window is still leaking or isn't sealed properly, you might need to speak with an expert.
Fogging up windows can also cause damage to the window, causing discomfort and higher energy costs. One of the ways to combat this is to get it defogged which is to spray an anti-fog solution in the gap that will get rid of the fog. The draughts are likely to be back, and this isn't an effective long-term solution.
There are a few DIY kits that allow you to defog your own window but reviews aren't exactly positive and could be quite messy if not used properly. The best choice is to have a professional company carry out this procedure, as they are familiar with all of the equipment and techniques required. This will save you time and effort, and will ensure that the work will last for a lengthy period of time.
Damaged Frame
Modern uPVC frames are extremely strong and resistant to harsh weather. However, if your windows were not properly installed or damaged, it could result in problems like draughts, leaks and even lead to the frame splitting apart. If you notice this, it's a good idea to have the window repaired as soon as possible to stop any further damage to your house and avoid any health issues caused by the leaky or broken frame.
There are a few things that you can do yourself to avoid having to call in a professional for upvc window repairs for example:
Make sure that you ensure that your uPVC window is cleaned regularly. You can clean them with a soft cloth that has been soaked in warm water and soapy liquid paying particular attention to the corners where dirt typically accumulates. Make sure to use a white cloth to ensure that the dye on the fabric doesn't leave marks on the uPVC. You can also employ a solvent-based cleaner to get rid of stains that are stubborn when the uPVC is very dirty. It is important to remember that these chemicals can be dangerous when used incorrectly. Always read the directions before applying.
Keep all the moving parts of your uPVC windows lubricated as they will perform better and will reduce the chance of them getting stuck or rusted. WD-40 is compatible with uPVC windows and is readily available at a variety of hardware stores. Check that the drain holes aren't blocked. This could cause water to build up around the window and damage the frame.
If your uPVC windows are beginning to look yellow, this is due to exposure to sunlight over time. This is a natural process and there's nothing you can do to stop it, but if your uPVC is looking a little less than it should, you may want to think about upgrading them to energy efficient double glazed glass units. This will reduce the cost of energy and make your home look better.